- Product description
The service hatch 5 is suitable for access to the water tanks and as a general luggage hatch. It is made of high-quality, lightweight plastic and therefore has an extremely long service life. The double seal ensures optimum insulation and the special push-button fasteners enable the flaps to be closed securely so that they cannot spring open unexpectedly or be forced open. It is waterproof and UV-resistant. Suitable for horizontal or vertical installation.
Technical data
Cut-out dimensions (wxh): 749 x 297mm
Push button: -
Colour: Light Gray
Main dimensions (wxd): 785x340mm
Possible wall thickness: 23 - 39mm
Net weight: 1.6kg
Hinge position: Top or bottom
Daylight opening (wxh): 730x280mm
Lock holder: 2 (incl. ZADI cylinder)
Intended use: Service hatch
Safety instructions and warnings
Safety instructions for Thetford service hatch model 5 in light grey
1. installation:
- Installation should be carried out by a specialist.
- Before installation, ensure that the flap opening corresponds exactly to the dimensions of the model 5 in light grey.
- Installation must be carried out in accordance with the manufacturer's instructions.
2. use:
- Use only for the intended purpose.
- Do not climb on or place weights on the flap or lock.
- Do not pull or hang on the flap.
- The flap must not be open while driving.
- The flap must not be opened when the vehicle is in motion.
- Ensure that the flap is fully open during use.
- Keep the flap clean and free of dirt or debris during use.
3. maintenance:
- Regularly clean and lubricate the latches and hinges.
- Regularly check that the flap is securely closed and that the latches and hinges are in good condition.
4. warnings:
- Risk of injury from pinch points.
- Risk of injury from sharp edges.
- Risk of injury from falling or moving parts.
- Risk of fire due to gas leaks or other sources of ignition.
Manufacturer Contact information
Contact manufacturer
Thetford BV
Nijverheidsweg 29
4879 AP Etten-Leur
The Netherlands
info@thetford.eu