- Product description
The service hatch 4 is ideal for accessing gas cylinders or water tanks. It is made of high-quality, lightweight plastic and therefore has an extremely long service life. The double seal ensures optimum insulation and the special push-button fasteners allow the flaps to be closed securely so that they cannot spring open unexpectedly or be forced open. It is waterproof and UV-resistant. Suitable for horizontal or vertical installation.
Technical data
Cut-out dimensions (wxh): 648x348mm
Push button: -
Colour: white
Main dimensions (wxh): 700x395mm
Possible wall thickness: 23 - 39mm
Net weight: 1,8kg
Hinge position: Top, side or bottom
Daylight opening (wxh): 630x330mm
Lock holder: 2 (incl. ZADI cylinder)
Intended use: Service hatch
Safety instructions and warnings
Safety instructions for Thetford service hatch model 4 in white:
- The service hatch is to be used exclusively for its intended purpose.
- The service hatch may only be installed and maintained by authorised specialist personnel.
- Work on the service hatch must never be carried out without first switching off the power supply.
- Suitable protective gloves must be worn during installation and maintenance of the service hatch.
- The service hatch must never be opened by force.
- Access to the interior of the service hatch is only permitted after approval by authorised specialist personnel.
- If the service hatch is damaged, it may no longer be used and must be replaced.
- The service hatch must be checked regularly for damage and wear.
- Water must not be allowed to enter the service hatch.
Manufacturer contact information
Contact manufacturer
Thetford BV
Nijverheidsweg 29
4879 AP Etten-Leur
The Netherlands
info@thetford.eu