- Product description
2022 production!
The 30 bar gas hose is used in motorhomes, campers or caravans to connect the gas supply (LPG - propane/butane).
The connection is made on one side to the refillable gas bottle/gas tank bottle and on the other side to the lpg regulator (e.g. GOK, Truma Mono- or Doucontrol, Multimatik or similar) or a gas filter (e.g. CAMPKO, Truma or GOK) upstream of the gas pressure regulator, which also has an M20 external thread.
The gas hose is equipped with a hose rupture safety device. The integrated overflow valve (EFV) automatically interrupts the gas flow as soon as the nominal pressure is exceeded by 10%.
Technical data
Inlet G.8 W21.8 x 1.814 - L.H.
Outlet M20x1.5 union nut
Length 750 mm
Application among others Spain, Denmark, Netherlands, Norway, Hungary, Czech Republic, Slovakia, Ireland, Croatia
Approval according to EN16436 Class 3
Maximum permissible pressure 30 bar
Inner diameter 6.3 mm
Cold-resistant - 30°
Leak-tight -30°C - + 50°C
Tensile force for loosening the connections >300 kg
Brass connection fittings
Safety instructions and warnings
Safety instructions for [2022] High pressure gas hose G.8 W21.8 x 1.814 - L.H. x M20x1.5 - 750 mm incl. hose rupture protection:
1. ensure that the gas hose is properly installed and that all connections are tight.
2. regularly check the condition of the hose for damage such as cracks, abrasion or leaks. If any damage is found, the hose should be replaced immediately.
3. use the gas hose only for its intended purpose and ensure that it complies with the specified pressure and temperature limits.
4. before using the gas hose, make sure that all valves on the gas containers and appliances are properly closed.
5. avoid contact of the gas hose with sharp objects or chemical substances as this may cause damage.
6. ensure that the gas hose is not kinked or twisted so as not to impair the gas flow.
7. if a hose rupture safety device is fitted, ensure that it functions properly and is checked regularly.
8. when using the gas hose indoors, ensure that there is sufficient ventilation to avoid the risk of gas accumulation.
9. read all other safety and operating instructions from the manufacturer carefully before using the gas hose.
10. in the event of a gas leak or other safety concerns, shut off the gas supply immediately and contact a specialist.
Manufacturer contact information
Contact manufacturer
Integrated Gas Technologies APS
Gydevang 39-41
3450 Allerød Denmark
E-mail: sales@igt-lpg.com