- Product description
Similar to diode battery isolators, FET isolators allow two or more batteries to be charged simultaneously via one dynamo (or battery charger with one output) without connecting the batteries together. In contrast to diode battery isolators, there is practically no voltage loss with FET isolators. The voltage drop is less than 0.02 volts at low current and an average of 0.1 volts at higher currents.
Technical data
Type: Battery isolators
Maximum charging current [A]: 200
Weight [kg]: 1.4
Dimensions [mm]: 200 x 120 x 65
Product guarantee: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy battery isolator Argofet 200-3 200 A
- The battery isolator may only be installed and maintained by qualified personnel.
- Ensure that the battery is fully charged and disconnected before installing the isolator.
- Observe the maximum permissible voltage and current according to the manufacturer's specifications.
- Only use the connection cables and materials recommended by the manufacturer.
- Protect the disconnector from moisture, heat, dust and vibrations to ensure proper functioning.
- Regularly check the condition of the isolator and clean it of dirt if necessary.
- Always switch off the power supply to the disconnector before carrying out maintenance work.
- If problems or irregularities occur, contact the manufacturer or authorised specialists.
Manufacturer Contact information
Contact manufacturer
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com