- Product description
Similar to diode battery isolators, FET isolators allow two or more batteries to be charged simultaneously via one dynamo (or battery charger with one output) without connecting the batteries together. In contrast to diode battery isolators, there is practically no voltage loss with FET isolators. The voltage drop is less than 0.02 volts at low current and an average of 0.1 volts at higher currents.
Technical data
Type: Battery isolators
Maximum charging current [A]: 200
Weight [kg]: 1.4
Dimensions [mm]: 200 x 120 x 65
Product guarantee: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy battery isolator Argofet 200-2 200 A
General:
- Follow all instructions in the operating instructions.
- Work on electrical devices should only be carried out by trained specialists.
- Ensure that the device is switched off and disconnected from the power supply before opening it or carrying out maintenance work.
- Only use parts and accessories recommended or authorised by the manufacturer.
- Do not use the appliance in the vicinity of flammable materials or gases.
Installation:
- Installation should only be carried out by a qualified electrician.
- Ensure that the appliance is properly earthed.
- Check all cables and connections to ensure they are secure and tight.
- Keep the appliance away from heat sources and direct sunlight.
Operation:
- Use the appliance only for its intended purpose.
- Do not overload the appliance.
- Avoid exposing the appliance to extreme temperatures.
- Ensure that the device is operated in a well-ventilated environment.
Manufacturer Contact information
Contact manufacturer
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com