- Product description
Similar to diode battery isolators, FET isolators allow two or more batteries to be charged simultaneously via one dynamo (or battery charger with one output) without connecting the batteries together. In contrast to diode battery isolators, there is practically no voltage loss with FET isolators. The voltage drop is less than 0.02 volts at low current and an average of 0.1 volts at higher currents.
Technical data
Type: Battery isolators
Maximum charging current [A]: 100
Weight [kg]: 1.4
Dimensions [mm]: 200 x 120 x 65
Product guarantee: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy Argofet 100-2 Two batteries 100 A
WARNING!
Read the instructions carefully before installing or using the Argofet 100-2.
The Argofet 100-2 contains dangerous voltages. Do not touch any electrical contacts unless you have disconnected the power supply and de-energised it.
The Argofet 100-2 may only be installed and serviced by qualified personnel.
The Argofet 100-2 must not be installed in the vicinity of flammable gases or flammable substances.
Observe the connection direction. Incorrect connections can lead to damage to the device or the battery.
Only use the cables and connections recommended by the manufacturer.
The Argofet 100-2 is not a toy. Keep it away from children.
The Argofet 100-2 must not be installed near water or moisture.
Operating instructions:
The Argofet 100-2 must be properly installed and connected. Follow the manufacturer's instructions.
Do not overload the Argofet 100-2. Ensure that the maximum current and the maximum voltage are not exceeded.
Only use the Argofet 100-2 for its intended purpose.
For indoor use only.
The Argofet 100-2 must not be installed in the vicinity of high-voltage lines or devices.
The Argofet 100-2 must not be installed in the vicinity of electrostatic fields.
Manufacturer contact information
Contact manufacturer
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com