Victron Energy Argodiode 140-3AC 3 batteries isolator 140 A
Victron Energy Argodiode 140-3AC 3 batteries isolator 140 A

Victron Energy Argodiode 140-3AC 3 batteries isolator 140 A

Article no.: 115577A
Manufacturer: Victron Energy

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Diode battery isolators makeit possible to charge two or more batteries simultaneously via one dynamo without connecting the batteries to each other. Discharging the accessory battery, for example, does not discharge the starter battery.

Thanks to the use of Schottky diodes, the Argo battery isolators are characterised by a low voltage drop: at low current, the voltage drop is around 0.3 V and at nominal power around 0.45 V. All models are equipped with a compensation diode that can be used to slightly increase the output voltage of the inverter. This compensates for the voltage drop across the diodes in the insulator.

Technical data

Type: Battery isolators

Maximum charging current [A]: 140

Weight [kg]: 1.1

Dimensions [mm]: 120 x 150 x 60

Product warranty: 5 years

Safety instructions and warnings

Safety instructions for Victron Energy Argodiode 140-3AC 3 battery isolator 140 A:

1. assembly and installation:

- Ensure that the power supply is disconnected before starting work.

- Follow the manufacturer's instructions for proper assembly and installation of the product.

- Regularly check the connections for tightness and correct connection.

2. electrical safety:

- Only work on the battery isolator when the power supply is switched off.

- Avoid contact with live parts.

- Protect the product from moisture and wetness.

3. maintenance and inspection:

- Carry out regular inspections of the product to detect damage or wear.

- Clean the product according to the manufacturer's instructions.

- If you have any doubts or problems, contact an authorised specialist.

4 Disposal:

- Dispose of the product in accordance with local regulations and environmental standards.

- Disconnect the product from the power supply before disposing of it.

Please note that this is not a complete list of safety and operating instructions. Always consult the official manufacturer's documents and safety instructions for accurate and up-to-date information.

Manufacturer contact information

Manufacturer Contact

Victron Energy B.V.

De Paal 35

1351 JG Almere

The Netherlands

sales@victronenergy.com

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.