- Product description
Diode battery isolators makeit possible to charge two or more batteries simultaneously via one dynamo without connecting the batteries to each other. Discharging the accessory battery, for example, does not discharge the starter battery.
Thanks to the use of Schottky diodes, the Argo battery isolators are characterised by a low voltage drop: at low current, the voltage drop is around 0.3 V and at nominal power around 0.45 V. All models are equipped with a compensation diode that can be used to slightly increase the output voltage of the inverter. This compensates for the voltage drop across the diodes in the insulator.
Technical data
Type: Battery isolators
Maximum charging current [A]: 100
Weight [kg]: 0.8
Dimensions [mm]: 120 x 115 x 60
Product warranty: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy Argodiode 10-3AC 3 battery isolator 100 A
- Before you start installing or maintaining the product, please read the operating instructions carefully.
- Ensure that the power supply is switched off before starting work on the product.
- Do not use the product near flammable substances or in a damp environment.
- Do not use the product if it is damaged or defective.
- Do not open the product unless you are qualified and authorised to do so.
- Only use suitable tools and accessories to install or service the product.
- Keep the product away from children and unauthorised persons.
- Only use the product for the specified purpose.
- All local safety regulations and standards must be observed when installing the product.
- Do not use the product near medical equipment or other electronic devices that may be sensitive to electrical interference.
Manufacturer contact information
Manufacturer Contact
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com