- Product description
With the inverters you can operate household appliances that require 230 V/120 V alternating current with leisure or car batteries with 12 V, 24 V or 48 V direct current.
Models:250 VA, 375 VA, 500 VA, 800 VA, 1200 VA
Proven reliability
The full bridge and toroidal transformer topology has proven itself over many years. The inverters are short-circuit-proof and protected against overheating, whether due to overload or high ambient temperature.
ECO mode
In ECO mode, the inverter switches to standby mode when the load falls below a preset value (minimum load: 15 W). In standby mode, the inverter switches on for a short time (adjustable, default: every 2.5 seconds). If the load exceeds a preset value, the inverter remains switched on.
High starting power
Required for starting loads such as power converters for LED lamps, halogen lamps or power tools.
Technical data
Power [W]: 400
Power [VA]: 500
Peak power [W]: 900
Max. Efficiency [%]: 90
Input voltage range DC [V]: 18.4 - 34
DC input voltage [V]: 24
Low-voltage load disconnection [V]: 18.6
Low-voltage load reconnection [V]: 21.8
Feed-in phases: 1
Weight [kg]: 3.9
Dimensions [mm]: 275 x 172 x 86
Communication type: VE.Direct
Product guarantee: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy Phoenix inverter 24/500 230 V Ve.Direct IEC:
1. electrical safety:
- Switch off the power supply before installing the inverter.
- Ensure that the cabling complies with the applicable safety standards.
- Only use approved cables and connectors to install and connect the inverter.
- Ensure that the device does not get wet and is not exposed to liquids.
- Avoid contact with live parts of the inverter.
2. environmental safety:
- Ensure that the inverter is operated in a well-ventilated environment to avoid overheating.
- Avoid installing the inverter near flammable materials.
- Keep the inverter away from direct sunlight.
- Keep the inverter away from extreme temperatures, moisture and dust.
3. maintenance and servicing:
- Switch off the inverter before carrying out any maintenance work or repairs.
- Clean the device regularly with a dry cloth. Do not use aggressive cleaning agents.
- Regularly check the cabling and connections for damage or loose connections.
- If problems or malfunctions occur, contact the manufacturer or an authorised specialist.
Please note: These safety instructions are intended as a general guideline. Always read the complete manufacturer's instructions and safety information before installing and using the inverter.
Manufacturer contact information
Manufacturer Contact
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com