- Product description
The Battery Protectdisconnects the battery from non-essential loads before it is fully discharged (which would damage the battery) or before it no longer has enough power to start the engine.
The Battery Protect is a unidirectional device. It can only handle current in one direction, i.e. either current to a load or current from a charger, but not both currents at the same time. In addition, the current can only flow from the battery terminal to the load terminal. When used with a load, the battery is connected to the battery terminal, and when used with a charger, the charger is connected to the battery terminal.
Technical data
Type: Battery protection
Input voltage range DC [V]: 6 - 35
Maximum continuous discharge current [A]: 100
Weight [kg]: 0.5
Dimensions [mm]: 115 x 42 x 59
Product guarantee: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy Battery protector 12/24V-100A
- Only use the product in accordance with the manufacturer's instructions.
- Ensure that the product is properly installed and has no visible damage.
- Observe the specified maximum current of 100A and do not exceed it.
- Protect the product from moisture, water and other liquids.
- Only use the recommended cables and connections.
- Switch off the product before carrying out maintenance work.
- Keep the product away from children and do not leave it unattended.
- Observe the safety guidelines for handling batteries.
- Avoid contact with metal objects to prevent short circuits.
- Check the condition of the product regularly and replace it if it is damaged or worn.
- Comply with the applicable regulations and standards for your region.
Manufacturer contact information
Contact manufacturer
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com