Victron Energy Smart Battery Protect 12/24-100A
Victron Energy Smart Battery Protect 12/24-100A

Victron Energy Smart Battery Protect 12/24-100A

Article no.: 115531
Manufacturer: Victron Energy

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

The Smart BatteryProtectdisconnects the battery from unnecessary loads before it is fully discharged (which would damage the battery) or before it no longer has enough energy to start the engine.

When programming the Smart BatteryProtect via Bluetooth, any switch-on/switch-off levels can be set. Alternatively, one of nine predefined switch-on/switch-off levels can be set using the programming pin. If necessary, Bluetooth can be deactivated.

The Smart Battery Protect is a unidirectional device. It can only handle current in one direction, i.e. either current to a load or current from a charger, but not both currents at the same time. In addition, the current can only flow from the IN terminal to the OUT terminal. When used with a load, the battery is connected to the IN terminal, and when used with a charger, the charger is connected to the IN terminal.

Technical data

Type: Battery protection

Input voltage range DC [V]: 6 - 35

Maximum continuous discharge current [A]: 100

Weight [kg]: 0.5

Dimensions [mm]: 115 x 42 x 59

Communication type: Bluetooth

Product warranty: 5 years

Safety instructions and warnings

Safety instructions for Victron Energy Smart Battery Protect 12/24-100A

1. the device may only be installed by qualified personnel.

2. all connections to other voltage sources must be disconnected before installation.

3. operation and installation are at your own risk.

4. the device must be protected from moisture. It must not be operated near water.

5 The device must not be used in a potentially explosive environment.

6. disconnect the device from the power supply before opening it.

7. the appliance's fuses may only be replaced with equivalent fuses.

8. the battery voltage must be switched off before connecting the appliance.

9. ensure that the power cables are correctly connected to the battery.

10. the appliance must not be used in connection with live parts.

Manufacturer contact information

Contact manufacturer

Victron Energy B.V.

De Paal 35

1351 JG Almere

The Netherlands

sales@victronenergy.com

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.