- Product description
The Smart BatteryProtectdisconnects the battery from unnecessary loads before it is fully discharged (which would damage the battery) or before it no longer has enough energy to start the engine.
When programming the Smart BatteryProtect via Bluetooth, any switch-on/switch-off levels can be set. Alternatively, one of nine predefined switch-on/switch-off levels can be set using the programming pin. If necessary, Bluetooth can be deactivated.
The Smart Battery Protect is a unidirectional device. It can only handle current in one direction, i.e. either current to a load or current from a charger, but not both currents at the same time. In addition, the current can only flow from the IN terminal to the OUT terminal. When used with a load, the battery is connected to the IN terminal, and when used with a charger, the charger is connected to the IN terminal.
Technical data
Type: Battery protection
Input voltage range DC [V]: 6 - 35
Maximum continuous discharge current [A]: 220
Weight [kg]: 0.8
Dimensions [mm]: 120 x 123 x 62
Communication type: Bluetooth
Product warranty: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy Smart Battery Protect 12/24-220A:
1. read the manufacturer's instructions carefully before installing and using the product.
2. ensure that the product is only installed by authorised specialist personnel.
3. observe the specified input voltage requirements and ensure that they correspond to the specifications of the product.
4. ensure that the product is switched off before connecting it to the power supply.
5 Only use the power supply unit supplied or a spare part approved by Victron Energy.
6. keep the product away from moisture, heat sources and direct sunlight.
7. regularly check the condition of the product, especially the connections and cables, and do not carry out any repairs yourself in the event of damage.
8. before servicing or cleaning the product, unplug it from the mains and switch it off completely.
9. observe the specified load limits and do not overload the product.
10. keep the product out of the reach of children.
11. in the event of faults or problems, contact Victron Energy's authorised customer service.
Manufacturer contact information
Manufacturer Contact
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com