- Product description
The Battery Protectdisconnects the battery from non-essential loads before it is fully discharged (which would damage the battery) or before it no longer has enough power to start the engine.
The Battery Protect is a unidirectional device. It can only handle current in one direction, i.e. either current to a load or current from a charger, but not both currents at the same time. In addition, the current can only flow from the battery terminal to the load terminal. When used with a load, the battery is connected to the battery terminal, and when used with a charger, the charger is connected to the battery terminal.
Technical data
Type: Battery protection
Input voltage range DC [V]: 6 - 35
Maximum continuous discharge current [A]: 220
Weight [kg]: 0.8
Dimensions [mm]: 120 x 123 x 62
Product guarantee: 5 years
Safety instructions and warnings
Safety instructions for Victron Energy BatteryProtect 12/24V-220A:
- The device may only be installed and maintained by qualified personnel.
- Local regulations and standards must be observed when installing and maintaining the device.
- The device must be protected from moisture and must not be operated near water.
- The electrical contacts should be checked regularly for dirt and cleaned if necessary.
- The appliance must not be operated in the vicinity of flammable gases or liquids.
- The power supply must be switched off before opening the appliance.
- The appliance must be protected against overloading.
- The battery voltage must not be higher than 16 V when the appliance is connected.
- The appliance must not be operated in the vicinity of children.
Manufacturer Contact information
Contact manufacturer
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com