BRC angle connection with rotating nut for LPG injector rail

Safety instructions for BRC angled connection with swivelling nut for LPG injector rail:

• Work on LPG conversion kits may only be carried out by authorised specialists.
• The applicable regulations and standards must be observed when installing the elbow connection.
• The elbow connection may only be used for its intended purpose.
• Before installing the elbow connector, it must be ensured that it is suitable for the respective vehicle and the specific LPG conversion kit.
• No modifications may be made to the elbow connector.
• When installing the elbow connection, ensure that it is correctly aligned and fastened.
• Care must be taken to ensure that the elbow connection is not damaged.
• The elbow connection must not be overheated.
• Regular maintenance of the LPG conversion kit and the elbow connection is necessary to ensure their safe operation.
• If there are any deviations from the normal function of the elbow connection, it must be taken out of service immediately and checked by a specialist.
• Failure to observe the safety instructions may result in serious injury or damage.