- Product description
Linear LPG level sensor, provides a very accurate electronic linear signal proportional to the amount of gas and allows easy calibration of all readings between full and reserve via a PC software interface.
The device is equipped with an analogue display that enables a direct reading of the amount of GAS in the tank and has no wear-prone contacts.
The standard version of the sensor is equipped with a waterproof plug and 600 cm of cabling.
Also available in a version for left-hand multivalves.
Approvals
2006/28/EC
10R-03
Contents of the package
sensor
Wiring
2 fixing screws
Mounting instructions
Technical data
Supply voltage 5 Vdc ( ± 0.5V )
Linear voltage output signal 0.5 - 4.5 V ratiometric
Patent design
Free of mechanical contacts
Reading accuracy ± 1°deg @25°C
Low current consumption, max. 10 mA
Available reading range 0 - 148°deg
Protection class IP68
Reverse polarity protection max -10V Overvoltage +20 Short circuit protection of the output
Operating temperature -40°C +120°C
Safety instructions and warnings
Safety instructions for AEB CARTESIO linear tank level sensor:
1. electrical safety instructions:
- The device must be installed by a qualified electrician.
- The device may only be connected to a certified power source.
- Ensure that the correct cables are used for the connection.
2. operating safety instructions:
- The appliance must be operated in accordance with the operating instructions.
- Care must be taken to ensure that the appliance is not damaged.
- The appliance may only be installed in a suitable location.
- The appliance must not be installed near flammable materials.
- The appliance must be serviced regularly to ensure good performance.
3. instructions for disposal:
- The appliance must not be disposed of with normal household waste.
- The appliance must be disposed of in accordance with local regulations.
Manufacturer Contact information
AEB Alternative Fuel Electronics
LANDI RENZO S.p.A
Via Nobel 2
42025 - Cavriago (RE)
Italy
info@aeb.it