- Product description
The Victron EnergySmartsolar charge controllerMPPT12/24V20AhwithfixedBluetooth functionis suitablefor all acid, gel, AGM or lithium batteries with12V or 24V. The solar controller can be controlled with any app-enabled device via the free VictronConnectapp.
The most important features of the VictronEnergy Smart Solar charge controller MPPT
-Ultra-fastMPP tracker of thelatest generation ensures the best possible yield
- integratedVE.Direct data communication connection
-Battery Life Systemadjuststhe charging and maintenance times to optimise the service life of the battery
-Integratedprotection againstreverse battery polarity
- Multi-stage and adaptive charging algorithm
- Day/night timing and light dimming option
The new Smart version has overheating protection with switch-off function and automatic restart after reaching normal operating temperature.
Technical data
Product typeSingle-circuit regulator
Voltage12/24Volt
Module outputupto 290 watts
Charging current20Ah
Displaynone
Automatic system voltage detectionyes
Overcharge protectionyes
Deep discharge protectionno
Remote displaynone
EBL cable setno
Safety instructions and warnings
Safety instructions for Victron Energy Smart solar charge controller MPPT 12/24V 100/20A Bluetooth:
1 Assembly and installation:
- Mount the solar charge controller in a well-ventilated location that is protected from direct sunlight and moisture.
- Ensure that the mounting surface is sufficiently stable to support the weight of the charge controller.
- Never connect the solar charge controller directly to the main power supply.
- Observe the correct connection polarity and avoid short circuits.
2 Electrical safety:
- Only use approved and suitable cables and plugs to connect the solar charge controller.
- Ensure that the cable connections are tight and correct to ensure proper operation.
- Regularly check the cable insulation for damage and replace it if necessary.
- Ensure that the solar charge controller is protected from moisture, water and extreme temperatures.
3. operating instructions:
- Read the manufacturer's instructions carefully and follow all instructions for commissioning and maintaining the solar charge controller.
- Ensure that the solar charge controller is sufficiently ventilated to prevent overheating.
- Do not overload the solar charge controller and adhere to the specified maximum load limits.
- Keep the solar charge controller clean and free from dirt and dust.
Please note that this is only a general summary of the safety and operating instructions. Be sure to read the complete manufacturer's documentation for detailed instructions and information.
Manufacturer contact information
Manufacturer Contact
Victron Energy B.V.
De Paal 35
1351 JG Almere
The Netherlands
sales@victronenergy.com