Victron Energy Phoenix Smart IP43 Charger 12/50 (1+1) 230 V
Victron Energy Phoenix Smart IP43 Charger 12/50 (1+1) 230 V
Victron Energy Phoenix Smart IP43 Charger 12/50 (1+1) 230 V
Victron Energy Phoenix Smart IP43 Charger 12/50 (1+1) 230 V

Victron Energy Phoenix Smart IP43 Charger 12/50 (1+1) 230 V

Article no.: 112691A
Manufacturer: Victron Energy

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

This customisable 5-stage charger can charge each of the three battery banks with either 30A or 50A. Or the Phoenix 1+1 model delivers 3A to the starter battery and the rest to the house battery. 24V models are available with 16A/25A charging. Thanks to the Bluetooth function, you can monitor the charger and set alarms directly from your mobile phone. Adaptive, intelligent, dynamic charging functions - see data sheet below.

Automatic voltage compensation

The charger compensates for the voltage drop across the DC wiring by slightly increasing the output voltage when the DC current increases. Please refer to the manual for details.

Avoiding damage due to excessive gassing: BatterySafe mode

If a high charging current in combination with a high absorption voltage has been selected to charge a battery quickly, the charger prevents damage from excessive gassing by automatically limiting the voltage increase as soon as the gassing voltage is reached.

Less maintenance and ageing when the battery is not in use: storage mode

Storage mode is always activated when the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimise gas formation and corrosion of the positive plates. Once a week, the voltage is raised back to the absorption level to "equalise" the battery. This function prevents electrolyte stratification and sulphation, one of the main causes of premature battery failure.

VE.Direct interface

For a wired data connection to a colour control panel, PC or other devices.

Technical data

Battery technology: AGM; Classic; Gel; Lithium Ion

Max. Efficiency [%]: 92

Nominal battery voltage [V]: 12

AC input voltage [V]: 230

Charging voltage, absorption [V]: 14.4 / 14.7 / 14.2

Charging voltage, float [V]: 13.8 / 13.8 / 13.5

Input voltage DC [V]: 12

Charging voltage, storage [V]: 13.2 / 13.2 / 13.5

Nominal charging current [A]: 50

Weight [kg]: 3.5

Dimensions [mm]: 249 x 180 x 100

Communication type: Bluetooth; VE.Direct

Product warranty: 5 years

Safety instructions and warnings

Safety instructions for Victron Energy Phoenix Smart IP43 Charger 12/50 (1+1) 230 V:

1. read the manufacturer's instructions carefully before using the charger.

2. only use the charger in accordance with the manufacturer's instructions.

3 Ensure that the charger is properly connected to a suitable power source.

4. avoid moisture, water and extreme temperatures in the vicinity of the charger.

5. do not touch the charger with wet hands.

6. keep the charger away from flammable materials.

7. do not connect the charger to damaged sockets or cables.

8. do not use the charger if it is damaged or shows signs of malfunction.

9. switch off the charger when it is not in use.

10. keep the charger out of the reach of children and pets.

11. contact the manufacturer or authorised customer service if you have any questions or problems with the charger.

12. observe all other safety and operating instructions provided by the manufacturer.

Manufacturer contact information

Manufacturer Contact

Victron Energy B.V.

De Paal 35

1351 JG Almere

The Netherlands

sales@victronenergy.com

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.