Gas hose high pressure G.5 W21.8 x 1/14 L.H with seal (comb. A) x M20x1.5 - 450 mm incl. hose rupture safety device
Gas hose high pressure G.5 W21.8 x 1/14 L.H with seal (comb. A) x M20x1.5 - 450 mm incl. hose rupture safety device

Gas hose high pressure G.5 W21.8 x 1/14 L.H with seal (comb. A) x M20x1.5 - 450 mm incl. hose rupture safety device

Article no.: 112449A
Manufacturer: IGT
PU: 20

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

The 30 bar gas hose is used in motorhomes, campers or caravans to connect the gas supply (LPG - propane/butane).

The connection is made on one side to the refillable gas bottle/gas tank bottle and on the other side to the lpg regulator (e.g. GOK, Truma Mono- or Doucontrol, Multimatik or similar) or a gas filter (e.g. CAMPKO, Truma or GOK) upstream of the gas pressure regulator, which also has an M20 external thread.

The gas hose is equipped with a hose rupture safety device. The integrated overflow valve (EFV) automatically interrupts the gas flow as soon as the nominal pressure is exceeded by 10%.

Technical data

Inlet G.5 W21.8 x 1/14 LH with seal (Comb. A)

Outlet M20x1.5 union nut

Length 450 mm

Application among others Germany, Austria, Belgium, Czech Republic, Netherlands, Poland, Russia, Slovenia

Approval according to EN16436 Class 3

Maximum permissible pressure 30 bar

Inner diameter 6.3 mm

Cold-resistant - 30°

Leak-tight -30°C - + 50°C

Tensile force for loosening the connections >300 kg

Brass connection fittings

Safety instructions and warnings

Safety instructions for high-pressure gas hose G.5 W21.8 x 1/14 LH with seal (Comb. A) x M20x1.5 - 450 mm incl. hose rupture protection:

  1. Only use the gas hose in accordance with the manufacturer's instructions.
  2. Ensure that the gas hose is suitable for the intended use.
  3. Check the condition of the gas hose regularly. If there are signs of wear, damage or leaks, stop using the gas hose.
  4. The gas hose must be properly fitted and connected to the appropriate connections.
  5. Before using the gas hose, check that the seal is intact.
  6. Ensure that there are no leaks in the gas system.
  7. Keep the gas hose away from sources of heat, naked flames and other potential sources of ignition.
  8. The gas hose should not be kinked or twisted.
  9. Do not use the gas hose if it is damaged or shows signs of material fatigue.
  10. The gas hose must not be overloaded and must withstand the specified pressure and temperature limits.
Manufacturer contact information

Contact manufacturer

Integrated Gas Technologies APS

Gydevang 39-41

3450 Allerød Denmark

E-mail: sales@igt-lpg.com

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.