Injector nozzle for Valtek rail G 1/8’’ D. 6 mm

Safety instructions for injector nozzle G 1/8''D.6mm - for Valtek T30 injector

1. read all the manufacturer's instructions and notes before using the injector nozzle G 1/8''D.6mm - for Valtek T30 injector.

2. ensure that the injector nozzle is properly installed and compatible with the Valtek T30 injector.

3. before starting any maintenance or repair work on the injector nozzle, make sure that the Valtek T30 Injector is switched off and disconnected from the power supply.

4. wear suitable protective equipment such as gloves and safety goggles when using the injector nozzle.

5. use the injector nozzle only for its intended purpose and within the specified operating parameters.

6. clean the injector nozzle regularly according to the manufacturer's instructions to ensure optimum performance.

7. avoid contact with sharp edges or aggressive chemicals to prevent damage to the injector nozzle.

8. check the condition of the injector nozzle regularly and replace it if there are signs of wear or damage.

9. keep children and unauthorised persons away from the injector nozzle and the Valtek T30 injector to avoid accidents.