- Product description
- Media & Downloads
One of the best known pressure regulators on the market. It is used in all sequential BRC LPG conversion kits from MY 2007 onwards. 800, 1200 and 1500 mbar and 10 and 12 mm gas outlets are available.
OT = brass water connections
PL = Plastic water connections
Technical data
Homologation number: E13 67R-01 0016
Gas outlet: 10 / 12 mm
Water connections: made of brass or plastic 16 mm
Safety instructions and warnings
Safety instructions for BRC GeniusMB reducers (800 / 1200 / 1500 mbar)
1 The BRC GeniusMB reducer may only be installed, operated and maintained by authorised specialist personnel.
2. all voltage supplies must be switched off before installing and maintaining the reducer.
3. the reducer must be connected to a suitable gas supply system.
4. local safety regulations must be observed before installing the reducer.
5. the reducer must not be used if it is damaged or shows signs of ageing.
6. the appliance must not be installed near flammable materials.
7. ensure that the reducer is not installed in areas that are damp or wet.
8 The appliance must not be operated without adequate ventilation.
9. in the event of a gas leak, the appliance must be disconnected from the power supply immediately and reported to the responsible authority.
10. the reducer must be checked regularly for performance and serviced if necessary.
Contact
BRC GAS EQUIPMENT:
Westport Fuel Systems Italia S.r.l.
Via La Morra, 1
12062 - Cherasco (Cuneo) - ITALY
info.brc@wfsinc.com
Homologationsnummer: E13 67R-01 0016
Water connections: brass or plastic 16 mm