- Product description
The GOK rubber seal for fittings with a combination connection (Kombi.A) is designed to provide a reliable seal for the corresponding screw connection in liquefied petroleum gas systems. It is fitted on the pressure regulator side and seals the connection between the pressure regulator or connecting fitting and the corresponding mating connection.
Typically, the seal is used to seal the dispensing connection on an LPG tank. It is suitable as a replacement for a damaged, hardened, deformed or lost seal. To ensure a permanently tight connection, the seal must be selected to match the existing Kombi connection and correctly fitted into the designated housing.
Features:
- Original GOK replacement seal
- Design: Rubber seal
- For fittings with a combination connection (Kombi.A)
- Fitted on the pressure regulator side
- Typical application: Sealing the outlet connection on an LPG tank
Safety and warning notices
Notes:
- Work on liquefied petroleum gas (LPG) systems must only be carried out by suitably qualified specialist personnel.
- Before work begins, the LPG conversion kit must be completely depressurised. Keep away from open flames, sparks, smoking and other sources of ignition.
- Before installation, check that the seal is suitable for the existing combination connection.
- The seal must be clean, undamaged and correctly seated in its designated housing.
- Damaged, cracked, hardened, crushed or permanently deformed seals must not be used.
- Sealing surfaces and threads must be free from dirt, foreign matter and damage.
- The connection must not be twisted or tightened with excessive force.
- After assembly, the connection must be checked for leaks using a suitable leak detector or testing device.
- Open flames must never be used for leak detection.
- If you smell gas or detect a leak, shut off the gas supply immediately. The system must not be used again until it has been properly inspected and repaired.
- Seals are wear parts and must be replaced if damaged, worn or in accordance with the manufacturer’s specifications.
Manufacturer’s contact details
Manufacturer:
GOK Regler- und Armaturen-Gesellschaft mbH & Co. KG
Obernbreiter Straße 2–18
97340 Marktbreit
Germany
Telephone: +49 9332 404-0
Email: info@gok.de
https://www.gok.de/de/Kontakt/