- Product description
- Spare parts
Technical data
Homologation number E13 67R-01 0056
Technical data Li10 TURBO | |
| material | Cast aluminium |
| weight | 1.5 kg |
| Dimensions | - |
| Maximum inlet pressure | 28 bar |
| Outlet pressure | 1.2 bar |
| Solenoid coil voltage | 12 V |
| Operating temperature | -40C - +120C |
| Connection at input | M12x1 cable ø8 mm |
| Connection at output | Hose connection ø14 mm |
| Power output | up to 200 KW |
*without connection to the motor
Colder temperatures can reduce the efficiency of the reducer and the performance of the motor; in the event of higher ambient temperatures, the reducer can also be used on more powerful motors.
Safety instructions and warnings
Safety instructions for Landi Renzo reducer Li10 OVERSIZE TURBO M12x1 8mm (up to 200KW)
1. the reducer may only be installed by a qualified and competent professional.
2. before installing the reducer, all electrical circuits must be disconnected to avoid electric shocks.
3. installation must be carried out in accordance with the manufacturer's instructions
4. the reducer must be correctly connected to the vehicle.
5. ensure that all seals and connections are correctly and securely installed to prevent gas leaks.
6. ensure adequate ventilation during installation to prevent gas build-up.
7. all reducer components must not be damaged or show signs of wear.
8. if problems or unusual noises occur, operation must be stopped immediately and a qualified person consulted.
9. the reducer must be serviced regularly to ensure optimum performance and safety.
10. the reducer must not be tampered with or modified.
Manufacturer contact information
Landi Renzo S.p.A.
Via Nobel, 2
42025 Corte Tegge, Cavriago (RE)
Italy
info@landi.it
