- Product description
- Media & Downloads
The Truma Combi 6 E Next Generation Heater combines two functions in one unit. On the one hand, it heats the living space and ensures comfortable temperatures in larger caravans and motorhomes. On the other hand, it heats water in a ten liter stainless steel water tank, which can be used for showering or cooking.
The heater Combi 6 E Next Generation contains integrated electric heating rods, whereby heating with diesel, electric or mixed is possible. For operation during a stationary stay, the heater can be operated with 230V .
The combustion supply is automatically regulated by a integrated pressure sensor directly installed on the electronics.
This next generation Truma Combi D 6 E heater has a newly developed burner unit, whereby the burner unit now also runs in 1 kW steps and the correct kW stage is always used. This can prevent the white smoke caused by cold starts. In addition, this heater contains a new and more powerful diesel pump and umnfasst a lighter weight.
In extreme cold, the mixed operation of diesel and electricity is suitable, on cold days the diesel operation and in the transitional period the electricity operation.
Thanks to the asymmetrical shape of the water tank, the water is heated uniformly in about 20 minutes to 60 degrees.
When outside temperatures are low, the water tank is heated as well. At a warmer outside temperature, the water can be heated even without heating the living space with.
Thanks to the four air outlets, the heated air flows almost noiselessly into the vehicle and provides an optimal warm air distribution.
Efficient: lower power consumption due to newer burner technology
Practical: easy operation via digital control panel CP plus iNet ready
Saving space: light and compact design allows flexible installation
Comfortable: Automatic climate control possible in conjunction with a Truma air conditioner
To prevent the drain from the water tank from freezing, the drain valve FrostControl is automatically opened at temperatures below 3 degrees and the water is drained impact.
Energy source Diesel according to EN 590 / electricity
Nominal heat output diesel operation 1000 W/2000 W/3000 W/4000 W/5000 W/6000 W
Nominal heat output electric operation 900 W/1800 W
Nominal heat output mixed operation max. 6900 W (boost operation)
Fuel consumption 0.1 - 0.6 l/h
Current consumption (at 12 V): Heating and water tank operation 0.4 - 8.1 A
Current consumption (at 230 V) 3.9 A/7.8 A
Water capacity 10 liters
Heating time (from approx. 15 °C to approx. 60 °C): Water tank approx. 20 min
Heating time (from approx. 15 °C to approx. 60 °C): Heating and water tank according to EN 15033 ca. 80 min
Weight 16.9 kg
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (minimum dimensions - depending on installation situation, additional space for gas connection, water connections and safety/drain valve must be taken into account) (L x W x H) 540 x 500 x 350 mm
Current consumption (at 12 V): Heating water tank 0.5 A
Air flow rate (free blowing) max. 287 m³/h
Resting current approx. 1 mA
Resting current consumption CP plus (optional) 3 mA
FrostControl heating element (optional) max. 0.4 A
Pump pressure max. 2.8 bar
System pressure max. 4.5 bar
.