- Product description
- Accessories
DREHMEISTER M10x1 grommet for polyamide hose 6mm
With the DREHMEISTER feed-through, a polyamide hose can be firmly fixed from one side using a union nut and clamping ring, while the other side is attached to the intake manifold with an M10x1 thread. This allows the polyamide hose to be inserted into the intake manifold in a controlled manner without being sucked in itself. This method is used for LPG conversions to bring the injection point of the LPG fuel closer to the intake valves. The temperature-resistant polyamide hose serves as an extended injector nozzle in the intake manifold; the outward-facing end is connected to a 5 mm or 6 mm gas hose and a clamp and leads to the LPG injector.
Scope of delivery
- DREHMEISTER M10x1 feedthrough for 6 mm polyamide hose
Technical features
- Article no.: 100625
- Thread: M10x1
- Suitable for: Polyamide hose 6mm
- Fastening: Union nut and clamping ring
- Application: Fastening a polyamide hose to the intake manifold
- Application: LPG conversion
- Manufacturer: DREHMEISTER®
Safety instructions and warnings
- Always switch off the power supply before installing or servicing the product.
- Ensure that the polyamide hose is correctly dimensioned and meets the requirements.
- Only use the installation and connection elements recommended by the manufacturer.
- Regularly check the condition of the polyamide hose for damage or wear.
- Ensure that the polyamide hose is not excessively bent, stretched or kinked.
- Avoid contact of the polyamide hose with sharp edges or aggressive chemicals.
- Ensure that all connections and screw fittings are properly tightened.
- Observe the specified maximum operating pressures and temperatures for the polyamide hose.
- Keep the product out of the reach of children and unauthorised persons.
- If you have any questions or are unsure, contact the manufacturer or authorised specialist personnel.
Manufacturer information
DREHMEISTER®
HybridSupply GmbH
Roggenhorsterstr. 9b
23556 Lübeck
https://hybrid.supply/contact
