Fittings & spare parts for LPG reducers and CNG regulators

Fittings and spare parts for LPG reducers and CNG regulators are grouped in this category: gas and water connections in various angles and diameters, safety valves, MAP and vacuum connections, O-rings and clips as well as CNG pressure gauges. HybridSupply stocks these single parts for workshops that only need to replace one connection when changing or repairing a reducer.

Show 1 to 20 (of in total 63 products)

Gas and water connections by reducer

  • AC (STAG): 135° angled gas connection in 12 and 16 mm made of polymer, according to the product description suitable for the R01 150, R01 250, R02 120, R02 150 and R02 TWIN reducers.
  • BRC: gas connections for Genius-MAX (12 mm straight), GeniusMB (12 mm angled) and AT90 (8 mm), brass water connections for Genius MB (10 mm angled, 16 mm straight) in sets of two and water connections for Genius-MAX.
  • Landi Renzo: water connections in plastic (135°, Li10) and brass (Li10, IG1), 90° connections for Li02/Li12, gas outlets for IG1, Li02, Li10, Li12 and SE81 and MAP and vacuum connections for Li10, IG1, Li02 and Li12.
  • Lovato, Tartarini, Tomasetto: Lovato water connection d. 16/130° for all Lovato reducer types and gas outlet d. 19/100°; Tartarini gas outlets at 45° and 90° and water connections at 0° and 90° with clips and O-ring; Tomasetto water connections (16 mm) for AT07 and AT09 – with one O-ring for reducers up to 2017, with two O-rings from 2017.
  • Others: KME (swivelling gas connection and 12 mm angled gas connection), OMVL (coolant connection d. 16/90° for CPR), Zavoli (gas inlet Zeta N/S), MAGIC III Power (M12x1/Ø 12 mm), Europegas (PREMO/SUPREMO, 16 mm), Koltec (VG392, 90°, 3/8" NPT x 16 mm) and the DREHMEISTER® hose connector with 16 mm outer diameter for the gas and water side of Prins and KME reducers.

Safety valves, valve mountings and small parts

Safety valves are available for the BRC AT90E and the Landi Renzo Li02, Li10 and Li12, plus the safety valve connection on the Lovato RGJ. For Prins VSI reducers, HybridSupply stocks the shut-off valve mounting for units produced from 11/2012, the O-ring for the water connection and a retrofit ring against reducer whistling. Small parts include the Necam adapter between reducer and shut-off valve, the repair kit for the shut-off valve on the EMER Palladio, the idle adjustment screw for Lovato LRG and the TA M10 to M5 adapter for the temperature sensor on the Zavoli Zeta.

CNG pressure gauges and parts for CNG regulators

For natural gas systems there are the AEB 806 and 807A pressure gauges as well as CNG pressure gauges in 12 V and 5 V versions which, according to the product description, are compatible with AEB electronics. The housing screw for the Tomasetto AT12 is available separately; complete regulators are listed under CNG pressure regulators, further sensors under Pressure sensors.

Matching material and ordering

For the connection to coolant circuit and gas line, there are coolant hoses for reducers and regulators and certified gas hoses; complete seal and diaphragm kits are listed under LPG repair kits.

Orders are placed through a dealer account, which also shows trade customers the net prices. End customers who only need a single connection are referred by HybridSupply, via the contact form, to a trade partner and, if required, a fitting workshop.

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.