Injector repair kits for LPG and CNG injectors are stocked by HybridSupply by manufacturer and series – with solenoid cores, closures, seals, springs and O-ring sets, depending on the kit for one injector or a whole rail. Garages and parts dealers source kits here for injectors from AC, AEB, BRC, Landi Renzo, Magic, Matrix, OMVL, Keihin (Prins), RAIL, Tomasetto, Valtek and Vialle.
| Manufacturer | Series | Contents according to product data |
|---|---|---|
| AC | ACW-01 (3 and 4 cyl.), ACW-02, ACW-03 | ACW-01: solenoid core, closure, rubber seal, spring |
| AEB | EVO (4 cyl.) | – |
| BRC | GP13 (1, 3 and 4 cyl.) | solenoid core, closure, rubber seal |
| Landi Renzo | GIRS12 (4 cyl.) | – |
| Magic | Magic Jet, Magic FX | one kit per single injector |
| Matrix | HD344/HD333, XJ322, XJ544/533 | plus solenoid block for 3- and 4-cylinder rail HD344/HD333 |
| OMVL | Rail D-N REV1 ZG (aluminium) | OMVL number 900141, for blue and black solenoid coil |
| Prins | Keihin KN8 and KN9 (4-cylinder rail) | O-ring set |
| RAIL | IG1 Apache, IG2 Namur, Metis, Phoenix; IG3 Horizon; IG7 Navajo | kits, solenoid core, O-ring 9.25 × 1.78 and circlip Ø 7 mm for IG1 |
| Tomasetto | IT01 PLUS (4 cyl.) | – |
| Valtek | Type 30 | for 1, 2 and 3 ohms; one kit per cylinder |
| Vialle | Vialle injector | O-rings |
Specialist garages order repair kits once their trade access has been activated, which also shows the net prices. Vehicle owners who want their gas injectors overhauled can ask via the contact form – HybridSupply will name a dealer and a workshop.
Gas injectors are removed for overhaul and reconditioned with the repair kit for their series, which, depending on the manufacturer, contains the solenoid core, closure, seal and spring. The manufacturers’ product data on hybrid.supply do not describe a method for cleaning LPG injectors without removing them. According to the Prins data sheet, the additive Prins InjectorCare is added to the petrol and is designed for the petrol injectors.
Two values can be compared with the technical data: the resistance of the solenoid coil – 1, 2 or 3 ohms on the Valtek Type 30, depending on the version – and the flow rate. There are separate instructions for the flow test of the RAIL IG3 Horizon; according to the product description, overhauled Valtek injectors should be checked and adjusted with a calibration tool.