Injection nozzles for LPG & CNG injectors
Injection nozzles are used in LPG and CNG injection systems to define the fuel flow between the injector, injection rail and intake tract according to the respective system configuration. In this category you will find injection nozzles, calibration nozzles, nozzle adapters and suitable versions for LPG and CNG injectors from various manufacturers. Depending on the injector type, thread, nozzle diameter and installation situation, the components are used to adapt the flow rate, replace existing nozzles or repair existing injection systems. More about our range of injection nozzles for LPG and CNG injectors.
Calibration nozzles and nozzle adapters for gas injection systems
Injection nozzles are important adjustment and connection components within LPG and CNG injection systems. Depending on the system, they are installed directly on the injector, on the injector rail or in the connection area to the continuing line and influence the fuel flow to the respective intake manifold nozzle. Different nozzle diameters, thread sizes, lengths and designs must match the gas system used and the respective injector model. Nozzle cross-sections that are too small or too large can affect metering and lead to calibration problems, uneven fuel distribution or incorrect engine operation. The selection of the right injection nozzle depends on the system manufacturer, injector type, thread, nozzle diameter, cylinder output, connection type and existing system configuration.