Spare parts & accessories for LPG and CNG injectors

Spare parts and accessories for LPG and CNG injectors complement the injectors and rails at HybridSupply: solenoid coils, O-ring sets, injector connectors, distributors, mounting kits, hose connections, blanking plugs and sensor adapters. The parts fit systems from AEB, BRC, HANA, ICOM, Landi Renzo, Lovato, OMVL, RAIL, Tartarini, Valtek and Vialle; for Keihin single injectors there are DREHMEISTER® connectors.

Show 61 to 62 (of in total 62 products)

Solenoid coils and seals

  • Solenoid coils: for Valtek and RAIL with 3 ohms (red) and 1 ohm (yellow), AMP connector, 12 V, 11 W; for RAIL IG1 Apache; for Tartarini EVO 07 (4.25 ohms, 8.5 W, 6 V) and EVO 08/08G (8 W).
  • O-rings: BRC O-ring sets for IN03 old version and MY09 including circlip, ICOM O-rings brown and yellow, O-rings for Vialle injectors.

Complete repair kits by series are listed under injector repair kits.

Connectors, distributors and mounting kits

  • Connecting single injectors: DREHMEISTER injector connectors (90° elbow and T-piece 12 mm, clip, set) connect Keihin KN8/KN9 single injectors without an injector rail, the 90° elbow is made of aluminium; for HANA and Barracuda there are connectors as 90° elbow and T-piece.
  • Distributors: RAIL distributors for 2, 3 and 4 single injectors (12 mm/6 mm), Voltran filter housing with 4-cylinder distributor (without filter insert).
  • Mounting kits: Landi Renzo for EVO injectors (4 cylinders 12 or 14 mm, 6 cylinders 12 mm), AEB for R2S (4 cylinders, 10 mm).
  • Connections: BRC elbow connection for the MY09 rail inlet, HANA hose connector M14x1/Ø 12.5 for the aluminium rail, hose connections for AC W02 (Ø 11.5) and Valtek Type 34 (D12), hose nozzle M12x1, MTM hose fitting DN5 and union nut.

Sensor adapters, blanking plugs and special parts

  • Sensors and adapters: AEB temperature sensor for polymer rails (12 mm), adapter for the Sensata 100488 temperature sensor (M12x1/M12x1.25; IG1, IG2, IG5) and for Valtek Type 30, Lovato hose connection with sensor port for the pressure sensor. Further sensors are listed under sensors.
  • Blanking plugs: for the temperature sensor port of the AEB rail and for the pressure sensor and injector ports on BRC rails from MY09.
  • Installation on Mercedes: BRC spacer rings raise the air filter housing on M112/M113 (round) and M272/M273 (oval) engines so that the injectors fit underneath.
  • ICOM JTG: nozzle holder sets Type D and V, nozzle connection, fitting sets for 3/16?, 1/4?, 5/16? and 3/8? lines, mounting tools and a spring for pulling off the calibrators.

Garages and dealers order small parts such as coils, connectors and plugs at net prices as soon as they are logged in to their business customer account. For owners of gas vehicles who want a spare part fitted, HybridSupply arranges contact with a dealer and a specialist workshop; the request is made via the contact form.

Frequently asked questions about injector accessories

How do you use an injector cleaner such as Prins InjectorCare?

According to the Prins data sheet, one bottle of InjectorCare (250 ml) is added to about 30 litres of petrol in the petrol tank, preferably before refuelling; as a preventive measure this is repeated every 10,000 km or at every fill-up. For intensive cleaning, Prins describes a separate procedure with the tank one-eighth full and 15 minutes of driving under high load. According to the data sheet, the product is designed for petrol injectors – worn gas injectors are overhauled with repair kits. Data sheets are available in German, English, Spanish, French and Dutch; InjectorCare is also listed under injector care.

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.