- Product description
BRC LPG kit Sequent Plug&Drive MY10 – 4-cylinder (1500 mbar, 8 mm/orange)
Premium system for converting vehicles with sequential injection to LPG operation, designed for engines with up to 4 cylinders.
Scope of delivery
- Sequent Plug&Drive MY10 control unit
- IN03 MY09 electric injectors
- LPG reducer / pressure regulator
- Gas filter for the vapour phase
- MAP sensor
- One Touch switch
- Wiring harness and connection components
Technical features
- System: Sequent Plug&Drive MY10
- Version: LPG kit for sequential injection systems
- Suitable for engines with up to 4 cylinders
- Gas control unit: Sequent P&D MY10
- Control unit connection: FCI 64-pin
- Control unit housing material: Aluminium / plastic
- OBD communication via K and CAN
- Sequential switchover to gas mode
- Internal emulation of petrol injectors
- Internal ignition timing adjuster for methane operation included
- MAP sensor included in the kit
- Gas signal for temperature and pressure available
- Water temperature sensor on the pressure regulator
- Aluminium injector rail
- Injector type: IN03 MY09
- Level indicator via switch
- Gas filter working pressure: 0 to 4.5 bar
- Gas filter operating temperature: -40 °C to 120 °C
- Gas filter approval: R67-01 and R110
- Control unit operating temperature: -40 °C to 105 °C
- Control unit operating voltage: 7 V to 17 V
- Control unit maximum voltage: 24 V
- Control unit protection class: IP67
- Control unit approval: R67-01 and R110
Information on EAB / R115:
If the vehicle is R115-compatible, a BRC EUROPA multivalve must be used. Multivalves from other manufacturers are not listed in BRC’s R115 documentation.
- Applications for EAB or R115 must then be submitted using the form provided, quoting the shop order number.
- Applications submitted in any other way cannot be considered.
- In case of doubt, please enquire about availability by email, stating the relevant components and providing a legible copy of the vehicle registration document.
- Enquiries regarding availability will not be answered by telephone.
Safety and warning notices
- Installation, connection, adjustment and testing of the LPG kit must only be carried out by qualified specialists.
- Before commissioning, the system must be checked for correct installation, leaks and correct electrical connections.
- Use only in vehicles that are compatible with the BRC Sequent Plug&Drive MY10 system and the respective engine/cylinder configuration.
- Use components for gas operation only within the specified pressure, temperature and voltage ranges.
- When working on gas-carrying components, keep ignition sources away and ensure adequate ventilation.
Manufacturer information
BRC GAS EQUIPMENT: Westport Fuel Systems Italia S.r.l.
Via La Morra, 1 – 12062 – Cherasco (Cuneo) – ITALY
info.brc@wfsinc.com