- Product description
- Spare parts
- Accessories
Homologation: E4 67R-01 0358
- High power (>370 kW / 500 hp)
- No diaphragm
- Compact and lightweight design
- Integrated cut-off valve
- Fully dynamic outlet pressure
- Pressure setting via software
- No pressure loss, even at higher flow rates
- No pressure loss over time
- No pressure peaks during thrust shut-off
- MAP connection not required / through optional MAP sensor
Technical data eVP 500 reducer | |
WWeight | 0.8 kg |
Dimensions | ø56x142 mm |
Inlet pressure | 300 - 2500 kPa |
Outlet pressure | 0 - 550 kPa |
Solenoid coil voltage | - |
Solenoid coil power | - |
Connection at input | M10x1 (6 mm) or with adapter M12x1 (8 mm) |
Connection at the output | Hose connection ø16 mm |
Power output | up to 370 KW |
Safety instructions and warnings
Safety instructions for Prins eVP 500 reducers up to 370KW
- The reducer may only be installed and serviced by trained specialists.
- The reducer must be installed in accordance with local safety regulations and the manufacturer's instructions.
- Before maintenance work is carried out, the reducer must be completely switched off.
- Only original spare parts may be used.
- There is a risk of explosion if the vaporiser system is not properly installed or if malfunctions occur.
- The reducer must be connected to a suitable gas supply and it must be ensured that the gas pressure corresponds to the manufacturer's specifications.
- Fire or sparks in the vicinity of the reducer must be avoided.
- No flammable materials may be stored near the reducer.
- The reducer must be serviced regularly by trained specialists to ensure proper functioning.
- In the event of a malfunction or gas leak, the reducer must be switched off immediately and qualified personnel must be notified.
Manufacturer contact information
Westport Fuel Systems Netherlands
Jan Hilgersweg 22
5657 ES Eindhoven
The Netherlands
T +31 (0)40 254 77 00
sales@prinsautogas.com