- Product description
Dekalin Dekavator 250 ml
The adhesion activator from Dekalin is suitable for treating surfaces with a low surface tension (mostly plastics). This ensures a permanent bond and prevents the penetration of moisture. The decalcavator acts as a chemical bridge between the part to be joined and the adhesive.
Advantages:
- Fast drying, 5-10 minutes (depending on the surface)
- Cleaning
- Improves adhesion
- Easy handling
Dekalin Dekavator is suitable for pre-treatment of the following materials:
Aluminium
steel
Copper & brass
Painted & powder-coated metal Glass
Polyester (GFK)
ABS
PVC
Technical data:
Solids content : approx. 8% Specific
Density (20°C) : approx. 0.76 kg/litre
Flash point : approx. 9°C
Drying time (20°C/50% R.H.) : approx. 5 minutes
Colour : transparent
Storage: between +5°C and +30°C, cool and dry, protected from direct sunlight
Safety instructions and warnings
Safety instructions for Dekalin Dekavator - 250 ml
- Only use the product in well ventilated areas.
- Avoid inhalation of vapours or sprays.
- Keep the product away from children and pets.
- Avoid contact with skin and eyes. In case of contact, wash with soap and water.
- The use of protective gloves and eye protection is recommended.
- Keep the product away from heat sources, open flames or sparks.
- Do not use near electrical appliances.
- In case of ingestion or inhalation of the product, seek medical advice immediately.
- Avoid contact with ignition sources such as cigarettes or lighters.
Manufacturer Contact information
Manufacturer Contact
DINOL GMBH
Pyrmonter Street 76
D-32676 Lügde
info@dinol.com