- Product description
Homologation number E20 67R-01 0973
Technical data WC01 Rail | |
| Working pressure | 1.2 bar |
| Maximum pressure | 450 kPa |
| Operating voltage | - |
| Inlet connection | ø12 mm |
| Connections at the outlet | pre-drilled nozzles, d.5 |
| Temperature range | -20° / + 120° C |
| Resistance | 2.0 Ohm |
| Minimum injection time | - |
| Open | 2.4 ms* |
| Close | 1.7 ms* |
* at 1.2 bar
Safety instructions and warnings
Safety instructions for AC injector LPG CNG W01 - 3 cylinders incl. mounting material
- The assembly and installation of the AC injector should only be carried out by a qualified person.
- Only install the AC injector in a suitable location in accordance with the manufacturer's instructions.
- Ensure that all electrical wiring is properly connected before putting the AC injector into operation.
- Only use the materials and parts recommended by the manufacturer for the installation and maintenance of the AC injector.
- Ensure that the gas supply is properly and safely installed.
- The AC injector should only be installed in well-ventilated areas.
- Operation of the AC Injector requires regular maintenance and inspection by a qualified person to ensure safe and efficient performance.
- If problems or error messages occur, the AC injector should be checked immediately by a qualified person.
- Keep the AC injector and all associated materials and parts away from children and pets.
Manufacturer contact information
AC S. A.
15-181 Bia?ystok
ul. 42 Pu?ku piechoty 50
tel.: +48 85 743 81 00
biuro@ac.com.pl