- Product description
AEB2010 for 10 cylinder engines with sequential injection.
Scope of delivery:
- AEB2010 control unit 10 cylinder
- AEB2010 wiring harness 10 cylinder
- AEB025 MAP sensor
- AEB change-over switch
- Small parts bag
Technical details:
Software and installation instructions can be downloaded for free click here!
Plug connection: IP (6K9K) incl. water protection and lever system
Supply voltage: Vbatt=10÷16V.
Operating temperature: -40÷110°C.
Current consumption with actuators locked: Imax =0.5A
Current consumption in standby mode: Istandby =5µA
Up to 10 gas injectors with the following characteristics Imax=6, Vbatt,max=16V
2 power outputs for gas solenoid valves
Pmax=25W, Imax=2A (power and maximum current for each output with two outputs activated)
Pmax=50W, Imax=4A (power and maximum current for only one output).
Sensors:
Gas pressure sensor: AEB025
MAP sensor: original sensor of the vehicle
Gas temperature sensor: AEB sensor (4.7kOhm - included in PT MAP sensor), sensor (2.2kOhm)
Water temperature sensor: 4K7, original
Level sensor: AEB level sensor, AEB Linear (Cartesio), 0-90Ohm standard sensor, not standard inverted
Lambda sensor: 0-1V, 0-5V, 5-0V, 0.8-1.6V, UEGO (linear sensor in current)
Changeover switch: AEB119B.
Homologations:
2006/28/CE
67R-01
110R-00