FARO coolant hose ID 16x23 mm (per meter)

Safety instructions for FARO cooling water hose 16x23mm (sold by the metre)

- Carefully read and follow the manufacturer's instructions before installing or using the coolant hose. - Check the coolant hose regularly for damage, wear or leaks. If any defects are found, replace the hose immediately. - Do not use the coolant hose above its maximum operating temperature to prevent the hose from bursting or failing. - To prevent the hose from bursting or failing, do not load the coolant hose beyond its maximum operating pressure limit. - Do not kink or twist the coolant hose, as this may impair the flow rate. - Do not use the cooling water hose near sharp edges or hot surfaces to avoid damage. - When connecting or disconnecting the cooling water hose, ensure that the system is depressurised to avoid injury. - Do not bring the cooling water hose into contact with chemical substances that are not compatible with the material of the hose. - Do not overstretch or bend the cooling water hose improperly, as this can damage the hose. - To avoid damage, do not use the cooling water hose as a carrying handle or to suspend objects. - Do not use the cooling water hose near naked flames or heat sources to avoid the risk of fire. - Keep the cooling water hose out of the reach of children to prevent accidental injury. - If you have any questions or are unsure about the cooling water hose, consult the manufacturer or a specialist. Please note that these safety instructions serve as general guidelines and may not cover all specific safety requirements. It is recommended that you also refer to the manufacturer's information or other valid sources.