- Product description
After two years of development, FARO presents the FastyFit system for the LPG automotive market. It is a quick connection system that will revolutionise the current way of installing lines.
FastyFit is a patented and ECE R67.01 homologated system that has been developed from a deep understanding of the problems and requirements that arise when installing LPG systems.
The advantages of FastyFit are obvious, and consist primarily of
- increased safety
- easier installation
- time and cost savings
The FastyFit product line isdesignedexclusively for FAROPREMIUM flexible pipesand cannot be used for metal pipes. The product line consists of:
-FastyFitquick: six fittings, each straight and 90° for 6 and 8 mm pipes, 100% tested and equipped with a special O-ring to withstand the high temperature fluctuations and aggressive substances when operating with LPG.
-FastyFitnipple: two pipe sockets with plug-in connection profile for 6 and 8 mm pipes
-FastyFitkey: special spanner for loosening the quick-fit connections of 6 and 8 mm pipes
-FastyFitlubricant: Lubricant to reduce friction and wear. The chemical formula required many months of development and laboratory testing and was developed using parameters such as the Stribeck curve.
- increased safety
- easier installation
- time and cost savings
The FastyFit product line isdesignedexclusively for FAROPREMIUM flexible pipesand cannot be used for metal pipes. The product line consists of:
-FastyFitquick: six fittings, each straight and 90° for 6 and 8 mm pipes, 100% tested and equipped with a special O-ring to withstand the high temperature fluctuations and aggressive substances when operating with LPG.
-FastyFitnipple: two pipe sockets with plug-in connection profile for 6 and 8 mm pipes
-FastyFitkey: special spanner for loosening the quick-fit connections of 6 and 8 mm pipes
-FastyFitlubricant: Lubricant to reduce friction and wear. The chemical formula required many months of development and laboratory testing and was developed using parameters such as the Stribeck curve.
Safety instructions and warnings
Safety instructions for FARO FASTYFIT quick connector 8mm - 1/4"- 90° angle
General safety instructions:
- The product may only be used by trained personnel.
- Ensure that the pipes or hoses connected with the quick connector can withstand the specified pressure.
- Ensure that the pressure in the system is relieved before using the quick connector.
- Ensure that the quick connector is installed correctly and securely.
- Not suitable for use in potentially explosive atmospheres.
Operating instructions:
- The quick connector is designed for use with liquids and gases.
- Ensure that the direction of flow corresponds to the arrow marking on the quick connector.
- The quick connector is suitable for use at temperatures between -20°C and 120°C.
- Ensure that the quick connector is not overloaded.
- Ensure that the quick connector is not damaged.
- The quick connector should be checked regularly for leaks and damage.
Manufacturer contact information
Contact manufacturer
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it