- Product description
After two years of development, FARO presents the FastyFit system for the LPG automotive market. It is a quick connection system that will revolutionise the current way of installing lines.
FastyFit is a patented and ECE R67.01 homologated system that has been developed from a deep understanding of the problems and requirements that arise when installing LPG systems.
- increased safety
- easier installation
- time and cost savings
The FastyFit product line isdesignedexclusively for FAROPREMIUM flexible pipesand cannot be used for metal pipes. The product line consists of:
-FastyFitquick: six fittings, each straight and 90° for 6 and 8 mm pipes, 100% tested and equipped with a special O-ring to withstand the high temperature fluctuations and aggressive substances when operating with LPG.
-FastyFitnipple: two pipe sockets with plug-in connection profile for 6 and 8 mm pipes
-FastyFitkey: special spanner to release the quick-fit connections of 6 and 8 mm pipes
-FastyFitlubricant: Lubricant to reduce friction and wear. The chemical formula required many months of development and laboratory testing and was developed using parameters such as the Stribeck curve.
Safety instructions and warnings
Safety instructions for FARO FASTYFIT quick connector 8mm - 1/4" straight:
1. before using the quick connector, ensure that you have read and understood the manufacturer's operating instructions.
2. before installing or removing the quick connector, make sure that all devices are switched off and disconnected from the power supply.
3. use the quick connector only for its intended purpose and within the specified technical parameters.
4. ensure that you have selected the correct size of quick connector for your application.
5. ensure that the quick connector is correctly mounted and securely fastened to prevent accidental loosening or detachment during operation.
6. regularly check the condition of the quick connector, in particular for wear, damage or deformation. If there are signs of damage, you should stop using the quick connector and replace it with a new one.
7. keep the quick connector away from moisture, dust and other contaminants to ensure that it functions properly.
8. avoid excessive strain on the quick connector to prevent damage or failure.
9. read the manufacturer's safety instructions for the overall system in which the quick connector is used to ensure that all safety precautions are observed.
10. in the event of a problem or malfunction of the quick connector, contact the manufacturer or authorised customer service for support.
Manufacturer contact information
Manufacturer Contact
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it