Stargas O-Ring for pressure and temperature sensors 13x2 - FPM - 75/80

Safety instructions for Stargas O-ring for pressure and temperature sensor 13x2 - FPM - 75/80

1 Always wear suitable protective equipment such as gloves and safety goggles when installing and replacing the O-ring.

2 Only use O-rings that meet the manufacturer's specifications.

3. ensure that the O-ring and its components are clean and free from contamination before installing it.

4. ensure that the O-ring is correctly positioned and correctly located in the groove.

5. regularly check the condition of the O-ring and replace it if there are signs of wear or damage.

6. avoid excessive tensile or compressive loads on the O-ring to maintain its integrity.

7. observe the specified temperature and pressure limits for the O-ring.

8. keep the O-ring away from sharp edges or aggressive chemicals to prevent damage.

9. read the manufacturer's instructions and safety information carefully before using the O-ring.

10. if you have any uncertainties or questions regarding the installation or operation of the O-ring, consult the manufacturer or an authorised specialist.