- Product description
BRISK Silver LPG/ CNG DR14S
Width across flats: 16 mm
External thread: 19 mm
Thread diameter: M 14 x 1.25 mm
Electrode gap: 0.7 mm
Torque: 20-30 Nm
Replacement interval: max. 30,000 km
Brisk code: 1352
The BRISK Silver Line has been specially designed for the requirements of LPG/CNG fuelled vehicles. The silver centre electrode has a smaller diameter than conventional spark plugs and significantly reduces the voltage requirement due to its small electrode gap.
BRISK Silver spark plugs can be used in both petrol and gas-powered vehicles.
You can find the current BRISK catalogue and a selection guide in our download area by clicking here.
Safety instructions and warnings
Safety instructions for BRISK SILVER LPG DR14S spark plug:
1. intended use:
The BRISK SILVER LPG DR14S spark plug is specially designed for use in vehicles powered by liquefied petroleum gas (LPG). Only use the spark plug in accordance with the manufacturer's instructions and for the intended purpose.
2. installation:
Ensure that the spark plug is correctly installed and firmly seated. Before fitting, check that the spark plug is the correct size and specification for your vehicle.
3. maintenance:
Regular maintenance of the spark plug is important to ensure its optimum performance. Follow the vehicle manufacturer's maintenance instructions and replace the spark plug at the recommended intervals.
4 Handling precautions:
Observe the following precautions when handling the spark plug:
- Wear suitable protective gloves when replacing the spark plug.
- Avoid any contact with flammable liquids or gases when replacing the spark plug.
- Keep the spark plug away from naked flames.
5 Disposal:
Dispose of the spark plug in accordance with local environmental regulations. Do not dispose of it with household waste, but take it to a suitable collection point.
6. manufacturer's safety instructions:
Also observe the manufacturer's safety instructions on the packaging or in the instructions supplied. These may contain additional important information on the safe use of the spark plug.
Manufacturer contact information
Contact manufacturer
BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala