- Product description
The DREHMEISTER adapter enables a secure connection between an LPG multivalve or LPG filling valve with G1/4" external thread and an LPG filling hose with 3/4"-16 UNF internal thread. ©HybridSupply
Technical data:
- Inlet: G1/4" female thread (for connection to multivalves or filling valves)
- Outlet: 3/4"-16 UNF male thread (for LPG filling hoses)
- Material: High-quality, corrosion-resistant brass
- Application: Connection between LPG filling systems and filling hoses ©HybridSupply
Advantages:
- Simple installation: Quick and secure screwing without additional adjustments
- High compatibility: Suitable for common LPG components with the specified thread sizes
- Durability: Robust brass for high resistance to gas and external influences ©HybridSupply
Safety instructions and warnings
Introduction:
Please read these safety instructions and warnings carefully before installing or using the adapter. Improper use can lead to leaks, malfunctions or dangerous situations. ©HybridSupply
1. general safety instructions
- The adapter is intended exclusively for connecting **LPG multivalves, LPG filling valves and LPG filling hoses** with the specified thread sizes.
- Before installation, ensure that the gas system is **pressurised**.
- Use only for LPG (liquefied petroleum gas) - not suitable for other gases or liquids.
- The adapter may only be installed by trained specialists. ©HybridSupply
2 Installation and handling
- The connection must be **tightened firmly but not overtightened** to avoid damage.
- Before first use and after each disassembly, carry out a **leak test** with leak detection spray or soap solution.
- Do not use Teflon tapes or unsuitable sealants - only **approved LPG gaskets** are permitted.
- Damaged or worn threads must not be used. ©HybridSupply
3. operational safety
- The adapter must not be subjected to mechanical stress or installed in such a way that could lead to tension or vibrations.
- Operation may only take place in a **well ventilated area** to avoid the risk of gas accumulation.
- If a leak is suspected, shut off the gas supply immediately and have the adapter checked.
- No naked flames or ignition sources near the adapter during operation. ©HybridSupply
4 Environmental conditions and storage
- Do not store in direct sunlight or at extreme temperatures.
- The adapter must be kept dry and clean to avoid corrosion.
- Protect from contact with aggressive chemicals or corrosive substances. ©HybridSupply
5 Maintenance and replacement
- The adapter should be checked regularly for wear and leaks.
- If the adapter is damaged or shows signs of corrosion, it must no longer be used and must be replaced.
- Do not make any unauthorised changes or repairs to the adapter. ©HybridSupply
6 Disposal
- The adapter must be disposed of in accordance with the applicable regulations for metal parts and LPG adapters.
- Do not dispose of in household waste - instead take to an authorised recycling centre.
- Observe environmentally friendly disposal to avoid environmental pollution. ©HybridSupply
Observing these safety instructions ensures safe use of the adapter and helps to prevent accidents and damage.
Manufacturer contact information
Manufacturer:
HybridSupply GmbH
Roggenhorsterstr. 9b
23556 Lübeck, Germany