DINITROL RC900 Rust converter 400ml spray can, amber
DINITROL RC900 Rust converter 400ml spray can, amber

DINITROL RC900 Rust converter 400ml spray can, amber

Article no.: 116777A
Manufacturer: DINITROL
PU: 12

This item can only be ordered in full packaging units. (PU 12 pieces or multiples thereof).

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description
  • Technical details

DINITROL RC900 SPRAY is a rust converter based on an organic chelate complex combined with epoxy resin.

It actively converts the rust on the substrate into a stable organic iron complex. When the product dries, it forms an impermeable barrier against further corrosion.

DINITROL RC900 SPRAY penetrates about 7 - 10 times deeper into the rust than conventional rust conversion products and forms a dry and strong adhesive film that is suitable as a base for paint build-up and as a carrier for further corrosion protection products.

  • Polymer film formed on converted rust
  • Deep penetration
  • Easy application
  • Can be painted over

Pre-treatment

DINITROL RC900 SPRAY should be applied to corroded surfaces. Remove loose rust, grease and dirt with a wire brush, sandpaper or sandblasting. It is best to clean carefully with acetone or paint thinner before application.

Application

Shake the spray can well before application. The product should be applied several times in succession at a distance of approx. 25 cm.

The metal temperature should not be below 10ºC. The material is dust-dry after one hour. If necessary, a further coat can be applied.

Recoating

DINITROL RC900 SPRAY can be recoated with most DINITROL corrosion protection products and colour systems

ColourAmber

Base materialOrganicchelate complex combined with epoxy resin

Container size400mlspray can

Container typeAerosol can

Dangerous goods information - NoteUN1950LTD QTY