- Product description
Loctite 638 is used for fastening various parts, but is directly suitable for fastening cylindrical parts. This fastener can cure in a joint size of up to 0.25 mm and guarantees maximum strength and durability.
Curing takes place exactly in the joint without air access between two preferably metallic surfaces. Thanks to its high resistance, it does not crack, does not come loose and does not leak, especially in the event of vibrations and impacts.
Specifically, you can use Loctite 638 to fasten bushings and sleeves in housings and on shafts. The maximum operating temperature is 180 °C.
Safety instructions and warnings
Safety instructions for LOCTITE® 638 - High-strength joining adhesive
- Always read labelling and product information before use.
- Avoid deposits and damage to seals to prevent contamination of the product.
- Avoid contact with skin and eyes. In case of contact, rinse thoroughly with water and seek medical advice.
- Work should be carried out in well ventilated areas.
- Keep the product out of the reach of children and pets.
- Avoid use near open flames or heat sources.
- The product should be stored in a dry, cool and ventilated area.
- The product must not come into contact with acid, water or oxidising materials.
- Avoid inhalation of vapours and sprays. Wear suitable protective equipment when working.
Manufacturer Contact information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html