- Product description
- Media & Downloads
Loctite 406 achieves a super-fast effect and curing. It is suitable wherever you need to achieve high strength immediately. It is mainly intended for plastics and rubber.
Loctite 406 instant adhesive has been specially developed for super-fast action. It cures almost instantly, the normal working time is between 2-10 seconds. Once Loctite 406 has cured, the bond is strong and durable, resulting in a long service life. Loctite 406 is particularly suitable for various plastics, rubbers and elastomers, but can also be used universally.
If you want to achieve even better results when bonding, we recommend the use of some primers, especially for materials that are difficult to bond. In addition, Loctite 406 superglue is colourless, so you can also use it on normally visible joints.
Technical Data
Technical data:
- Chemical base: Ethyl
- Viscosity in mPa*s: 20
- Colour: colourless, transparent
- Handling strength for: 2-10s
- Operating temperature: -40 to +120°C
- Remarks: Plastics and rubber, low viscosity
- Packaging: 20g
Safety instructions and warnings
Safety Instructions for LOCTITE® 406 - 20 g instant adhesive fast curing, low viscosity, universal
1 Read and understand all safety and operating instructions carefully before use.
2. keep the adhesive out of the reach of children.
3 Thoroughly clean and dry the surfaces to be bonded before use.
4. wear gloves and safety goggles during use.
5. do not inhale the adhesive or allow it to come into contact with the eyes or skin.
6. in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
7. if swallowed, seek medical advice immediately and show the packaging or the label.
8. store the adhesive in a cool, well-ventilated place.
9. do not store or use the adhesive near open flames or heat sources.
10. do not eat, drink or smoke while using the adhesive.
Operating instructions:
1. shake the adhesive well before use.
2. apply the adhesive thinly and evenly to one of the surfaces to be bonded.
3. immediately join the parts to be bonded and press firmly together.
4. allow the adhesive to dry completely according to the recommended drying and curing times.
5. close the bottle tightly after use to prevent the adhesive from drying out.
Manufacturer Contact Information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html