Cavagna 2-cylinder Multimatic 50 mbar 1,5 kg/h incl test valve

Safety instructions for Cavagna 2-bottle gas regulator Multimatik 50 mbar 1.5 kg/h with test valve G.13 - pipe fitting 8mm - 10mm

1. read all the manufacturer's instructions thoroughly before installing and using the gas regulator.

2. ensure that the gas regulator is suitable for the intended use.

3. check the condition of the gas regulator before installation. Damaged or defective parts must not be used.

4. use only suitable tools and equipment to install and connect the gas regulator.

5 Ensure that the gas pressure regulator housing and the screw connections are free of dirt, grease and other contaminants. 6.

6. attach the gas regulator securely to a stable surface to prevent it from falling or slipping.

7. ensure that all gas pipes and connections are correctly and securely installed to prevent gas leaks.

8. regularly check the condition of the gas regulator and the gas lines for damage or leaks.

9. keep the gas regulator and gas bottles away from heat sources, open flames and sparks.

10. only use the gas regulator in well-ventilated areas.

11. observe all local regulations and laws regarding the installation and use of gas regulators.

12. in the event of problems or uncertainties, contact the manufacturer or a qualified specialist.