- Product description
Dekaseal 8936 is a high-quality, permanently adhesive sealant designed for OEM/professional use. The areas of use and application are diverse and can be extended as required.
To date, Dekaseal 8936 has been used in bus, caravan, motorhome, commercial vehicle and even train construction.
The sealant must always be applied between a mechanical connection.
Colour: Anthracite
Content: 310 ml
Packaging: Cartridge
Areas of application:
Substrates: ABS, aluminium, sheet metal, wood, paints, OMMA, PMMA, plywood, etc.
Sealing of: Cover strips, drains, superstructures, Bore holes, roof structures, culverts & openings, rubber - glass connections, flaps, pipes, holes, mouldings, etc.
Installation of: Windows, skylight domes, etc. in caravan windows, wagon, container construction.
And much more.
Resistant to, among other things: Water, road salt, weather influences.
Proper application:
The sealant can be applied using a hand gun or compressed air gun (2-3 bar required).
The substrate must be clean, dry and free of grease. Excess material can be dabbed off after installation without leaving any residue.
The sealant remains slightly sticky after drying, but is odourless and compatible with paint.
Technical data:
Dekaseal 8936 cannot be painted over
Base material : Polyisobutene, synthetic resins, fillers and solvents
Consistency : Paste
Curing/setting : Evaporation of solvent
Specific density (20°C), DIN 51757 : approx. 1.4 kg/litre
Very low water vapour permeability (0.1-0.2 gram/day/m²).
Open time (20°C/50% rel. LF) : approx. 3 hours
Solids content (DIN 53216, 3 hours at 120°C): approx. 89%, depending on colour
Viscosity (20°C, flowmeter, 49ml, 2bar, nozzle 4 mm): approx. 40 seconds, depending on colour
Temperature resistance : -30°C to +100°C
Application temperature : +5°C to +35°C
UV and weather resistance : excellent
Safety instructions and warnings
Safety instructions for Dekalin Dekaseal 8936 Anthracite (cartridge) 310 ml
1. read the instructions on the packaging and in the manufacturer's instructions carefully before using the product.
2 Always wear suitable personal protective equipment, such as gloves and safety goggles, when working with the product.
3. avoid contact of the product with skin and eyes. If the product accidentally gets on the skin, rinse thoroughly with soap and water immediately. In case of eye contact, rinse immediately with plenty of water and consult a doctor.
4 Store the product in a cool, dry place, out of the reach of children and pets.
5. use the product only in well ventilated areas to avoid accumulation of vapours. Do not work in enclosed areas without adequate ventilation.
6. keep flammable materials and naked flames away. The product is flammable and must not be used or stored near sources of ignition.
7 Dispose of the empty product and packaging in accordance with local regulations.
8. follow the manufacturer's specific application instructions for best possible results.
Please note that these are general safety instructions only. Always check the latest information on the manufacturer's website or in the manufacturer's instructions.
Manufacturer contact information
Manufacturer Contact
DINOL GMBH
Pyrmonter Street 76
D-32676 Lügde
info@dinol.com