- Product description
Serves as an adapter for pressure regulators with German (KLF) connection to the gas cylinders commonly used on the European market. For connecting a pressure regulator with German connection to the gas cylinders commonly used on the European market.
KLF x AG M 10 x 1 = Switzerland, Italy
Technical data
Inlet AG M10 x 1
Outlet thread G.12 = W21.8 x 1/14 LH
Material Brass
Application Italy, Switzerland
Safety instructions and warnings
Safety instructions for DREHMEISTER gas tapping nozzle no. 1 AG KLF x AG M 10 x 1
1. before using the tapping nozzle, check whether it is suitable for the intended use.
2. check the tapping nozzle regularly for damage or wear. If any defects are found, stop using the nozzle.
3 Thoroughly clean the extraction nozzle before connecting it to remove any dirt or particles.
4. when connecting the tapping spigot, ensure that it is firmly and tightly connected to the corresponding connection thread.
5. do not overload the tapping nozzle or use it improperly.
6. do not use the tapping nozzle near flammable materials, naked flames or sparks.
7. close the gas supply completely before removing the tapping nozzle.
8. always store the tapping nozzle safely when not in use and protect it from unauthorised use.
9. if leaks or other safety problems occur, take the tapping nozzle out of operation immediately and seek professional assistance.
10. observe these safety instructions and comply with all applicable national and regional regulations.