- Product description
The SRG Low Pressure Regulator 591 Jumbo enables a 10 mm gas hose to be connected to gas cylinders with a clip-on Withdrawal valve. The pressure regulator regulates the gas pressure so that the desired appliances can be connected.
Inlet: Clip-on (quick coupling) type G.56 - diameter 35mm according to EN26303
Outlet: Hose connection for 10mm
Inlet pressure: 16 bar
Outlet pressure: 50 mbar
Flow rate per hour: 2 kg/h
Advantages:
- Two-stage design ensures extremely stable flow rate
- No tools required to connect the regulator to the valve
- Seals itself after connection and prevents access to the control mechanism
The SRG Jumbo system was invented and patented by Willy Rackow in 1934.
Safety instructions and warnings
Safety instructions for SRG gas regulator (clip-on) 591 Jumbo 50mbar G.56 -> 10mm hose:
- Before installing the gas regulator, ensure that all connections and lines have been checked for leaks.
- The gas regulator may only be installed by an authorised specialist.
- It must be ensured that the gas regulator is used exclusively for its intended purpose (e.g. use with the specified hose).
- The gas regulator may only be installed in an upright position and in a well-ventilated place.
- Unqualified persons must not operate the gas regulator without supervision.
- Operating the gas regulator near open flames or sources of ignition is strictly prohibited.
- The gas regulator must be checked and serviced regularly by an authorised specialist.
- The gas regulator must not be operated with gases or liquids other than the intended gas.
- In the event of leaks or other problems with the gas regulator, the gas supply must be shut off immediately and an authorised specialist called in.
Manufacturer contact information
Contact manufacturer
ROTAREX SRG
Industriestrasse 11
35075 Gladenbach
Germany
Email: srg@rotarex.com