DREHMEISTER Adapter for USA Gas Regulator to German Propane Cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21,8 x 1/14 LH
DREHMEISTER Adapter for USA Gas Regulator to German Propane Cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21,8 x 1/14 LH
DREHMEISTER Adapter for USA Gas Regulator to German Propane Cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21,8 x 1/14 LH
DREHMEISTER Adapter for USA Gas Regulator to German Propane Cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21,8 x 1/14 LH
DREHMEISTER Adapter for USA Gas Regulator to German Propane Cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21,8 x 1/14 LH
DREHMEISTER Adapter for USA Gas Regulator to German Propane Cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21,8 x 1/14 LH

DREHMEISTER Adapter for USA Gas Regulator to German Propane Cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21,8 x 1/14 LH

Article no.: 111537
Manufacturer: DREHMEISTER

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

DREHMEISTER adapter for connection to US lpg regulators on American gas barbecues.

Have you imported a gas barbecue from the USA or bought an American gas barbecue from a European dealer? In this case, the US gas barbecue is supplied with a lpg regulator for American gas cylinders. This US lpg regulator with 3/8" Type 1 QCC (ACME) connection cannot be connected to German gas cylinders.

The DREHMEISTER adapter for connection to US lpg regulators on American gas barbecues offers a solution for barbecue enthusiasts.

The adapter is simply screwed between the US lpg regulator and the standard German gas cylinder with small cylinder connection G.12 (W21.8 x 1/14 LH).

Technical data

Adapter type: 3/8" Type 1 QCC (ACME)

Connection thread: G.12 W21.8 x 1/14 LH

Total length: 43 mm

Material: Brass

Safety instructions and warnings

Safety instructions for DREHMEISTER adapter for USA lpg regulator to German propane gas cylinder 3/8 Type 1 QCC (ACME) -> G.12 W21.8 x 1/14 LH

  • Before using the adapter, make sure that all components are in perfect condition and that the adapter meets the specific requirements.
  • The adapter may only be installed and used by authorised persons.
  • Ensure that the adapter is properly connected and secured to prevent gas leaks and other potential hazards.
  • The valve on the propane cylinder must always be fully closed when the adapter is not in use.
  • The adapter must not be submerged in water or exposed to moisture.
  • It is important that the adapter is not exposed to excessive pressure, extreme heat or extreme cold.
  • The adapter must not be used in the vicinity of naked flames, sparks or other sources of ignition.
  • The adapter must not be used if it is damaged.
  • To avoid potential hazards, the adapter should not be stored near flammable materials.
  • It is important that the adapter is kept out of the reach of children.
Manufacturer contact information

Contact manufacturer

HybridSupply GmbH

Roggenhorsterstr. 9b

23556 Lübeck

https://hybrid.supply/contact

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.