Victron Energy Battery protector 12/24V-65A
Victron Energy Battery protector 12/24V-65A

Victron Energy Battery protector 12/24V-65A

Article no.: 112675
Manufacturer: Victron Energy

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

The Battery Protectdisconnects the battery from non-essential loads before it is fully discharged (which would damage the battery) or before it no longer has enough power to start the engine.

The Battery Protect is a unidirectional device. It can only handle current in one direction, i.e. either current to a load or current from a charger, but not both currents at the same time. In addition, the current can only flow from the battery terminal to the load terminal. When used with a load, the battery is connected to the battery terminal, and when used with a charger, the charger is connected to the battery terminal.

Technical data

Type: Battery protection

Input voltage range DC [V]: 6 - 35

Maximum continuous discharge current [A]: 65

Weight [kg]: 0.2

Dimensions [mm]: 106 x 48 x 40

Product guarantee: 5 years

Safety instructions and warnings

Safety instructions for Victron Energy BatteryProtect BP-65 12/24V 65A:

1. observe the applicable safety regulations and guidelines.

2. ensure that the product is properly installed and the connections are correctly connected.

3. use only the battery types and voltages recommended by the manufacturer.

4. ensure that the battery is correctly polarised.

5. avoid short-circuiting the battery connections.

6. protect the product from moisture, heat and direct sunlight.

7. do not overload the product and adhere to the specified maximum current.

8. keep the product out of the reach of children and pets.

9. switch off the product before carrying out maintenance work or cleaning.

10. follow the manufacturer's instructions for maintenance and servicing of the product.

11. if problems occur, contact the manufacturer or authorised customer support.

12 Do not use the product if it is damaged or defective.

13. keep the connections and cables of the product clean and free of dirt.

14. disconnect the product from the power supply when not in use or during long periods of storage.

15. read the complete operating instructions for the product before using it.

Manufacturer contact information

Manufacturer Contact

Victron Energy B.V.

De Paal 35

1351 JG Almere

The Netherlands

sales@victronenergy.com

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.