LPG & CNG injection: injectors, nozzles and rails

LPG and CNG injection at HybridSupply covers every component that meters vaporised autogas or natural gas and delivers it into the intake manifold: injectors, injector nozzles, injector rails and manifold nozzles, plus repair kits, spare parts, and mixers and stepper motors for Venturi systems. As a wholesaler, HybridSupply supplies conversion centres, garages and parts dealers with components from BRC, Landi Renzo, Valtek, RAIL, HANA, Keihin for Prins systems, DREHMEISTER® and other manufacturers.

More sub categories:

The seven areas of the injection range

  • LPG and CNG injectors: rails for 2 to 8 cylinders, single injectors, 24 V truck injectors and OEM injectors from Bosch and Landi Renzo.
  • Injector repair kits: cores, closures, seals, springs and O-rings, each matched to a series.
  • Injector nozzles: nozzles for the injector gas outlet, by thread and bore, plus ICOM calibrators.
  • Injector rails: rails for BRC, Landi Renzo MED, HANA H2001, Barracuda and Keihin KN8/KN9.
  • Manifold nozzles: screw-in nozzles, polyamide-hose feed-throughs, inliners and adapters for petrol injectors.
  • Spare parts & accessories: solenoid coils, injector connectors, distributors, mounting kits, blanking plugs and sensor adapters.
  • Venturi accessories: mixers, stepper motors and flow regulators plus IMPCO diaphragms.

Sequential injection and Venturi systems

In sequential gas injection each cylinder has its own injector. The gas system’s ECU opens it electrically; the gas flows through the injector nozzle and a hose to the manifold nozzle and from there into the intake manifold. Venturi systems work without injectors: a mixer in the intake tract adds the gas to the incoming air, and on lambda-controlled systems a stepper motor sets the gas quantity. Complete systems are listed under LPG conversion & CNG kits, Lovato Venturi systems under Lovato Venturi LPG conversion kit.

Autogas components carry an approval under UN ECE Regulation No. 67, series 01 (R67-01), natural gas components one under Regulation No. 110 (R110). Most injectors are suitable for both LPG and CNG and approved under R67-01 and R110.

Selection, documents and ordering

Which parts belong together depends on the system manufacturer and series: injector nozzles follow the thread and bore of the injector, injector rails the injector type and sensor port, repair kits the series and in some cases the production date. The downloads section holds, among other things, data sheets for Landi Renzo GIRS12 and the ECO-EVO injector rail, nozzle tables for the RAIL IG7 Navajo and a repair manual for the OMVL SuperLight injector rail. An overview of the system manufacturers is given in the blog post Which LPG conversion kit manufacturers are there?.

Only trade customers can buy from HybridSupply; net prices appear after logging in to a business customer account. Looking for a specialist workshop to convert or repair your gas system? Use the contact form and we will put you in touch with a partner near you, free of obligation.

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.