High-pressure hoses for gas regulators in gas lockers
In this category you will find high-pressure hoses for connecting gas cylinders to gas pressure regulators in the gas locker of motorhomes, caravans, campers and camper vans. The hoses are installed between the gas cylinder and the pressure regulator and are available in different versions, including lengths of 450 mm or 750 mm as well as versions with or without integrated hose rupture protection. On the regulator side, the high-pressure gas hoses usually feature a G.36 / M20x1.5 union nut connection, while different country-specific cylinder connections such as G.12, G.2 or other connection standards are used on the cylinder side. More about our range of high-pressure hoses for gas regulators in gas lockers.
High-pressure hoses between gas cylinder and pressure regulator
High-pressure hoses connect the gas cylinder to the gas pressure regulator and are therefore an important component of the gas supply system in the gas locker. They are suitable for use in leisure vehicles and allow connection to different gas cylinder valves and country-specific cylinder connections. Depending on the version, high-pressure gas hoses are available with different connection combinations, hose lengths and safety features. Versions with integrated hose rupture protection automatically shut off the gas flow if the hose is damaged or torn off, increasing the safety of the system. This allows gas cylinders, regulator systems and changeover systems to be connected professionally, safely and according to the respective installation situation.